how to replace garbage disposal hardwired

HOW TO REPLACE GARBAGE DISPOSAL HARDWIRED CRACKED

Flip the switch to make sure everything’s working as it should.Īnd that’s that! Clean your new splash guard regularly and it will stay like-new for months or years. With the disposal firmly reattached, simply reconnect the drain and dishwasher lines, then reconnect the power. You can also stack books or other sturdy objects underneath the disposal to prop it into place. If you lie on your back underneath the sink, it may make it easier to reconnect the disposal on your own. If someone is available to hold the disposal while you take care of tightening the ring, that’s ideal. This is the tricky part: holding the heavy disposal in place while you tighten the locking ring with the screwdriver. Just peel the old one off, wipe the top of the disposal clean, and snap the new one on. The splash guard fits snugly on top of the disposal like a plastic lid on a can of peanuts. When you’ve fully loosened the ring, the disposal will drop straight down.

It might take some effort to get it moving, but once it’s loose enough to turn with one hand, move your other hand to support the bottom of the disposal.

Slide your screwdriver into one of the tube-shaped fittings around the edges of the ring and use it as leverage to turn the ring counter-clockwise. Next, you’ll need to loosen the locking ring that attaches the disposal to its mount. But keep in mind that there may be water in these lines, so position the bucket underneath and be prepared for splashdown when you initially remove them. If you have a second line connecting the disposal to the dishwasher, remove that connection as well. This is usually connected with two or more screws. Start by disconnecting the drainpipe, usually made of plastic or metal, that extends from your disposal to the wastewater line. One person can do this alone, but it’s a lot easier with a second set of hands. Test your disposal to ensure it’s disconnected.įinally, enlist the help of a friend or family member if one is available to help reattach the disposal at the end of the process. If your disposal is hardwired, go to your breaker box and flip the breaker switch for the disposal. Many disposals have a cord that plugs into an outlet under the sink - unplug it and it’s safe to work. Next, disconnect the disposal from its power source. Check this before you begin, and while you’re under the sink, clear out everything in the cabinet so that you have space to work. Whether you need a flathead or Phillips head screwdriver depends on the types of screws used to connect the drain pipe and dishwasher line to the side of the disposal. To begin, all you need is a bucket, a replacement splash guard and a screwdriver. New gaskets usually cost less than $10 at your local hardware store, and the job can be done in fifteen minutes or less.

HOW TO REPLACE GARBAGE DISPOSAL HARDWIRED CRACKED

But when it becomes cracked or brittle, there’s no excuse not to go ahead and replace it. That flappy rubber gasket around your garbage disposal drain can last for years if you clean it regularly and only use your disposal sparingly.

How to replace garbage disposal hardwired